Specifications

45
Chapter 4 - AT Commands, S-Registers and Result Codes
Command: Y n Long Space Disconnect
Values: n = 0 or 1
Default: 0
Description: Y0 Disable sending or responding to long space
break signal on disconnect.
Y1 Enable sending or responding to long space
break signal on disconnect. (Both modems must
have Y1 set.)
Command: Z Modem Reset
Values: n/a
Description: Reset modem to default values. Defaults come
from user NVRAM if &W0 is set, from factory
ROM if &W1 is set.
Command: , Dialing Pause
Values: n/a
Description: Placed in dialing command, comma causes
dialing pause for time set by S8.
Command: : Continuous Redial
Values: n/a
Description: Placed at end of dial command, a colon causes
continuous redial of a number until answered.
Not used in ZDXK or ZDXI modems.
Command: ; Return to Command Mode
Values: n/a
Description: Placed at end of dial command, a semicolon
causes an immediate return to command mode
after dialing.