Specifications

44
MT1932ZDX Quick Reference Guide
Command: &W n Store Configuration
Values: n = 0 or 1
Default: 1
Description: &W0 Store current settings in NVRAM; load them at
power-on or following the ATZ command instead
of loading the factory defaults from ROM.
&W1 Clear user default settings from NVRAM.
Command: X n Result Codes and Call Progress Selection
Values: n = 0–4
Default: 0
Description: X0 Basic result codes ( CONNECT only); does not
look for dial tone or busy signal.
X1 Extended result codes ( CONNECT 28800,
CONNECT 33600 , etc.); does not look for dial
tone or busy signal.
X2 Extended result codes with NO DIALTONE ; does
not look for busy signal.
X3 Extended result codes with BUSY ; does not look
for dial tone.
X4 Extended result codes with NO DIALTONE and
BUSY .
Command: #X n Number of XOFF Characters Sent
Values: n = 0 or 1
Default: 0
Description: #X0 Single XOFF character sent after buffer is full.
#X1 Multiple XOFF characters sent (one for every
character received after buffer is full).