Specifications

42
MT1932ZDX Quick Reference Guide
Command: $SB n Serial Port Baud Rate
Values: n = speed
Default: 57600
Description: $SB300 Set serial port to 300 bps.
$SB1200 Set serial port to 1200 bps.
$SB2400 Set serial port to 2400 bps.
$SB4800 Set serial port to 4800 bps.
$SB9600 Set serial port to 9600 bps.
$SB19200 Set serial port to 19200 bps.
$SB38400 Set serial port to 38400 bps.
$SB57600 Set serial port to 57600 bps.
$SB115200 Set serial port to 115200 bps.
Note: Baud adjust must be off ($BA0) to enable fixed baud rate.
Command: #S y Enter Setup Password
Values: y = password (6–10 characters)
Default: MODEMSETUP
Description: Enters the remote configuration setup password.
Note: entry must be all CAPS
Command: #S= y Store Setup Password
Values: y = password (6–10 characters)
Default: MODEMSETUP
Description: Stores a new remote configuration setup password.
Note: entry must be all CAPS
Command: T Tone-Dial
Values: n/a
Default: P command
Description: Modem will tone-dial numbers following a T in
the dialing command.