Specifications
38
MT1932ZDX Quick Reference Guide
Command: M
n
Modem Speaker Control
Values:
n
= 0, 1, 2, or 3
Default: 1
Description: M0 Speaker always off.
M1 Speaker on until carrier signal detected.
M2 Speaker always on.
M3 Speaker on during dialing, off during handshaking.
Command: $MB
n
Modem Baud Rate
Values:
n
= speed
Default: 19200
Description: $MB75 Originate call in ITU-T V.23 mode (ZDXK,
ZDXI only)
$MB300 Originate call at 300 bps.
$MB1200 Originate call at 1200 bps.
$MB2400 Originate call at 2400 bps.
$MB4800 Originate call at 4800 bps.
$MB7200 Originate call at 7200 bps.
$MB9600 Originate call at 9600 bps.
$MB14400 Originate call at 14,400 bps.
$MB16800 Originate call at 16, 800 bps.
$MB19200 Originate call at 19,200 bps.
Command: N
d
Dial a Stored Number
Values:
d
= 0 or 1
Default: None
Description: Dial stored telephone number
d.
Command: N
d
N
e
... Number Linking
Values:
d
= 0 or 1;
e
= 1 or 0
Default: None
Description: Dial stored number
d
; if it is busy, dial stored
number
e
.
Note: Must have X
n
=4 in order to use Number Linking.