Specifications

37
Chapter 4 - AT Commands, S-Registers and Result Codes
Command: I n Inquire Product Codes
Values: n = 1 or 2
Default: None
Description: I1 Display firmware version number.
I2 Display modem description.
Command: #I x Enter Login Password
Values: x = password (6–10 characters)
Default: MULTI-TECH
Description: Enters the remote configuration login password.
Note: entry must be all CAPS
Command: #I= x Store Login Password
Values: x = password (6–10 characters)
Default: MULTI-TECH
Description: Stores a new remote configuration login password.
Note: entry must be all CAPS
Command: L n List Commands
Values: n = 5–8
Default: None
Description: L List stored telephone numbers.
L5 List current operating parameters.
L6 List current S-register values.
L7 List additional current operating parameters.
L8 List online diagnostic parameters.
Command: #L n V.42 Mode Selection in Originate Mode
Values: n = 0, 1, 2, or 3
Default: 0
Description: #L0 Modems negotiate V.42 mode.
#L1 MNP on & LAP-M off.
#L2 LAP-M on & MNP off.
#L3 Disable detection phase and go directly to LAP-M.