User`s manual

4 Update–ISDN CAPI
ISDN CAPI Adapter Configuration
1. The RVS-COM Installation: ISDN Adapter
window appears. Click Next.
The ISDN Protocols and Services window
appears. Click Next.
2. The ISDN Softfax window appears. Select
the following:
Use Softfax to send fax
Use Softfax to receive fax
Softfax should also receive at 14400 bps
Click Next.
3. The ISDN Softmodem window appears.
Select Use Softmodem, then click Next. Then
click Finish.
ISDN Line/Phone Numbers Configuration
1. The ISDN Line/Phone Numbers window
appears. Click Next.
2. The ISDN Line and Location window
appears. Enter the correct ISDN line type. For
example, Europe, Euro-ISDN (DSS1).
3. Click Dialing Properties to change Location,
Country Code, Area Code, or Access Code.
Click OK when finished to return to ISDN Line
and Location window. Then click Next.
4. The Charges window appears. Enter the unit
charge information for your ISDN calls. Then
click Next.
5. The ISDN Phone Numbers window appears.
Enter your MSN number for each service.
Then click Next.
NOTE: In Europe, if you subscribe to MSN service,
specify a unique MSN number for each application
such as Eurofile Transfer, Voice Mail, and G3 Fax.
If not, you must enter the MSN number 0 for your
application. You can enable one service ONLY with
the MSN number 0 (for example, either G3 Fax, or
Voice Mail, or Eurofile Transfer).
RVS-COM Lite Installation