User`s manual

Update–ISDN CAPI 9
Applications
Click Properties. Make sure the COM port is
assigned correctly and no conflict exists. For
example, RVS Port (COM6). Click OK, then
close the window.
3. Run Windows 95 Hypertrm. Set ATS0=1
<Enter> by using the AT command to make
the ISDN TA PC Card to automatically answer
the incoming X.75 calls. Then wait for the
incoming calls.
Act as a Calling Party (make outgoing calls)
1. Select Start è Programs è RVS-COM Lite
è CommCenter. Make sure the following
settings are correct:
Your ISDN phone number
the COM port assignment
MSN/EAZ numbers
If you change any settings, remember to
reboot your system.
2. Select My Computer è Control Panel è
Modem. Select RVS ISDN X.75 transparent.
Click Properties. Make sure the COM port is
assigned correctly and no conflict exists. For
example, RVS Port (COM6). Click OK, then
close the window.
3. Run Windows 95 Hypertrm. Enter a name for
the new connections. For example, RVS_X75.
Click OK. Enter the ISDN phone number that
you want to connect to. Select RVS ISDN X.75
transparent in the Connect using box. Click
OK. Click the Dial button to dial.
After you establish the ISDN link, you can use the
data transmission protocol such as Z-modem or
X-modem, for data transfer.
4.4 EuroFile Transfer Applications
Act as a Called Party (Host Mode)
1. Select Start è Programs è RVS-COM Lite
è CommCenter.
2. Click the Port tab. Make sure the ISDN port