User guide

MR9600-100 User Guide
2 CommPlete Communications Server
Introduction
This manual describes the field installation of a Multi-Tech MR9600-100 Controller (henceforth, MR9600-
100) into a CommPlete Communications Server chassis. This manual also contains a reference guide to the
commands that are used to configure and control the MR9600-100. For configuration instructions, refer to
the System Installation and Quick Start section of you CommPlete documentation set.
Product Description
The MR9600-100 is the system controller module for the CommPlete Communications Server. The
MR9600-100 contains a built-in Web, FTP, and Telnet server, an embedded SNMP agent, and an
unmanaged Ethernet switch module. Its complete management capabilities allow the CommPlete
Communications Server and its segments to be managed remotely across any TCP/IP network.
LED Indicators
The MR9600-100 front panel contains the following LED indicators.
• Card status LEDs 1–16
• MR9600-100 Controller Ethernet status LEDs 1–4
• Ethernet switch LEDs
Figure 1. MR9600-100 Controller front panel.