User guide

MR9600-100 User Guide
72 CommPlete Communications Server
t1status
Parameter: Device
Description: Interrogates the status of the specified T1 device. The specified device must a T1 device. T1
devices can exist only at 1b, 1c, 5b, 5c, 9b, 9c, 13b, and 13c.
Security: Guest
Example:
[0] A:\MMM # t1status 5b
T1 Card Status:
LED Information: Red Alarm, Sync Loss
Framing: DS1 AT&T Extended Super Frame (ESF)
Line Coding: Binary 8 Zero Substitution (B8ZS)
FXS Signaling Options: E&M Wink Start
Dial-in Address: No Address
Acknowledgement Wink: Disabled
Transmit Level: - 0.0dB
Receive Level: - 3.0dB
Firmware Version: 1.00C
[1] A:\MMM #
type
See cat.
unmount
Parameter: Specifier
Description: Remove the drive from the operating system. This is commonly done before formatting the
drive.
Security: Supervisor
Example:
[01] A:\# unmount b:
[02] A:\ # format b:
[03] B:\ #