User guide

4 Commands
CommPlete Communications Server 69
t1debug
Parameter: Device
Description: Displays the status of AB Signalling bits for both the transmit and receive directions of each
DSO channel for the specified T1 device within the CommPlete. TX = from CommPlete T1 card to central
office. RX = from central office to CommPlete T1 card.
Security: Supervisor
Limitation: CC9600 only
Example:
[31] A:\ # t1debug 1b
1. Enable Signal Bit monitoring
2. Turn Off signal bit monitoring
3. Signal Poll interval (4)
=> 1
Completed enabling all selected devices!
[32] A:\ #
01B 01B
Tx/Rx Tx/Rx
AB/AB AB/AB
01 00/00 02 00/00
03 00/00 04 00/00
05 00/00 06 00/00
07 00/00 08 00/00
09 00/00 10 00/00
11 00/00 12 00/00
13 00/00 14 00/00
15 00/00 16 00/00
17 00/00 18 00/00
19 00/00 20 00/00
21 00/00 22 00/00
23 00/00 24 00/00
E&M Immediate Start Protocol Tx(AB) Rx(AB)
OFF HOOK 11 11
ON HOOK 00 00
RINGING NA NA
[33] A:\ # t1debug 1 b
1. Enable Signal Bit monitoring
2. Turn Off signal bit monitoring
3. Signal Poll interval (4)
=> 2