User guide

MR9600-100 User Guide
58 CommPlete Communications Server
1. Binary 8 Zero Substitution (B8ZS)
2. Alternate Mark Inversion (AMI)
3. ZBTSI
Enter Selection (<1>,2,3, q, -):
FXS Signaling Options
1. E&M Wink Start
2. E&M Immediate Start
3. Ground Start
4. Loop Start
Enter Selection (<1>,2,3,4, q, -):
Transmit Level
1. - 0.0dB
2. - 7.5dB
3. -15.0dB
4. -22.5dB
Enter Selection (<1>,2,3,4, q, -):
MultiCommManager Environment Setup
1. System Defaults Setup
2. Device Specific Setup
Enter Selection (1,<2>, q, -): 2
Device Specific Setup
1. Controller Setup
2. Ras Setup
3. T1 Setup
Enter Selection (<1>,2,3, q, -): 1
IP Address:192.168.90.3
Date:11/10/1997
Time:4:31am
Default Trap IP:192.168.90.5
Default Gateway:192.168.90.1
Subnet Mask:255.255.255.0
Read Community:********
Write Community:********
IP Address (<192.168.90.3>, q, -):
Date (<11/10/1997>, q, -):
Time (<4:31am>, q, -): 4:31pm
Default Trap IP (<192.168.90.5>, q, -):
Default Gateway (<192.168.90.1>, q, -):
Subnet Mask (<255.255.255.0>, q, -):
Read Community (<********>, q, -):
Write Community (<********>, q, -):
IP Address:192.168.90.3
Date:11/10/1997
Time:4:31pm
Default Trap IP:192.168.90.5
Default Gateway:192.168.90.1
Subnet Mask:255.255.255.0
Read Community:********
Write Community:********
Config CONTROLLER? (<y>, n): y
IP Address 192.168.90.3 stored
Trap IP Address 192.168.90.5 stored
Gateway IP Address 192.168.90.1 stored
Subnet mask 255.255.255.0 stored
Read Community public stored
Write Community public stored
Device Specific Setup