User guide

MR9600-100 User Guide
56 CommPlete Communications Server
se, setenviron
Parameter: None
Description: Allows you to check or change the environment values for the MR9600. The IP address,
default trap IP, gateway IP, subnet mask, and community strings may all be changed.
Security: Supervisor
Example:
Username: supervisor
Password: **********
Welcome to the MultiCommManager
1.99 Beta
[0] A:\ # se
Getting System Defaults
MultiCommManager Environment Setup
1. System Defaults Setup
2. Device Specific Setup
Enter Selection (<1>,2, q, -):
System Defaults Setup
1. Network Defaults
2. Ras Defaults
3. Ras Security Defaults
4. T1 Defaults
Enter Selection (<1>,2,3,4, q, -): 1
Default Gateway:0.0.0.0
Subnet Mask:0.0.0.0
Primary DNS Server:0.0.0.0
Backup DNS Server:0.0.0.0
Default Gateway (<0.0.0.0>, q, -):
Subnet Mask (<0.0.0.0>, q, -):
Primary DNS Server (<0.0.0.0>, q, -):
Backup DNS Server (<0.0.0.0>, q, -):
System Defaults Setup
1. Network Defaults
2. Ras Defaults
3. Ras Security Defaults
4. T1 Defaults
Enter Selection (1,<2>,3,4, q, -): 2
Operating System:Ras Express pre(5.2)
Frame Type:TYPE_II
Address Method:Per port config
Wan Port IPCP:Disabled
Operating System
1. Ras Express pre(5.2)
2. SCO Unix
3. Windows NT
4. Novell Netware
5. Ras Express 5.2 (or later)
6. Other