User guide

4 Commands
CommPlete Communications Server 41
getcalls
Parameter: Device or none
Description: Displays call traffic for the modems listed in device . If there is no parameter, call traffic is
listed for every installed modem.
Security: Supervisor
Example:
[0] A:\ #
[1] A:\ # getcalls
Modem DateTime Connect Info. Call Duration User ID Phone Number
1A No Calls
1B No Calls
1C 05-21 08:15:02 A-33600-V.42bis 000-00:00:08
1C 05-21 08:15:41 A-33600-V.42bis 000-00:00:08
1C 05-21 08:32:58 A-33600-V.42bis 000-00:00:09
2A 05-21 08:13:48 O-33600-V.42bis 000-00:00:08 DT13
2A 05-21 08:14:26 O-33600-V.42bis 000-00:00:09 DT13
2A 05-21 08:15:02 O-33600-V.42bis 000-00:00:08 DT13
2A 05-21 08:16:20 O-33600-V.42bis 000-00:00:08 DT13
2A 05-21 08:33:02 Originate Open Call DT13
2B 05-21 08:13:47 O-33600-V.42bis 000-00:00:08 DT16
...
[2] A:\ #
getfaults
Parameter: Device or none
Description: Displays faults for the modems listed in device . If there is no parameter, faults are listed for
every installed modem.
Security: Operator
Example:
[0] A:\ # getfaults
Modem Date Time Fault Description
1 06-05 10:18:51 Rack Online
06-05 10:19:17 Remote management session initiated
11 06-05 10:19:26 Modem card Removed
7 06-05 10:19:31 Modem card Removed
8 06-05 10:19:46 Modem card Installed
[1] A:\ #
[2] A:\ # getfaults 3a:3c
3A No fault/status found
3B 05-21 08:27:1 Modem reset by rack controller card
3C No fault/status found
[3] A:\ #