User guide

MR9600-100 User Guide
36 CommPlete Communications Server
bpstatus
Parameter: None
Description: Displays the rack’s back plane polling activity between the controller and each powered
device. Each correctly operating device responds to three specific polls; “Busy”, “No Response”, and “No
Acknowledgement”. If the device does not respond the counter/s will increment. The example below
shows all devices in a fully loaded CC9600 are responding correctly.
Security: Supervisor
Example:
[1] A:\# bpstatus
Backplane Status: Busy:NoResp:NoAck
-:no polling 0:count of 0 1-9: tens digit plus 1 *:>=ninety
Slot ABCDEFGHIJKLMNOP
1: 000 000
2: 000 000 000 000 000 000 000 000
3: 000 000 000 000 000 000 000 000
4: 000 000 000 000 000 000 000 000
5: 000 000
6: 000 000 000 000 000 000 000 000
7: 000 000 000 000 000 000 000 000
8: 000 000 000 000 000 000 000 000
9: 000 000
10: 000 000 000 000 000 000 000 000
11: 000 000 000 000 000 000 000 000
12: 000 000 000 000 000 000 000 000
13: 000 000
14: 000 000 000 000 000 000 000 000
15: 000 000 000 000 000 000 000 000
16: 000 000 000 000 000 000 000 000
[2] A:\ #
bye
Parameter: None
Description: Logs the User off of the system
Security: Guest
Example:
[03] B:\# Bye
Bye
Username: