User guide

MR9600-100 User Guide
24 CommPlete Communications Server
Parameter Types
Many MR9600-100 commands require a parameter to complete the command. Most of the required
parameters fall into one of the four following types.
Pathname
Description: A DOS-style path and/or file name. A partial path assumes the current directory.
Full
pathname example: a:\mmm\MR9600-100.ini
Partial
pathname example: MR9600-100.ini
The preceding partial pathname gives the same result as a:\mmm\MR9600-100.ini if the current working
directory is a:\mmm.
Device
Description: A list of modems or T1 devices separated by commas. No spaces are allowed. A colon selects
a range of devices from the device preceding the colon through the device following the colon.
The device identifier includes the device’s slot number and device letter. A CommPlete Communications
Server has 16 slots, numbered from left to right, with the RASCards occupying slots 1, 5, 9, and 13. Each
modem card contains 8 modems, represented by the
letters A, B, C, D, E, F, G, and H . Thus, 7D is the
fourth modem in slot 7.
Examples:
The following two strings each select modems 1A, 2A, 2B, 2C, 2D, 2E, 2F, 2G, 2H, 3A, 3B, and 4C:
1A,2A:3B,4C
1A,2A,2B,2C,2D,2E,2F,2G,2H,3A,3B,4C.
Note: T1 devices can exist only at 1b, 1c, 5b, 5c, 9b, 9c, 13b, and 13c.
IP Address
Description: An IP address string consisting of four decimal numbers separated by periods. Each number
may have up to three digits.
Example: 192.168.4.25