User guide

60
Chapter 5 - Commands
The H2 Menu is as follows:
MULTIMUX Eight Position DIP-Switch Definitions and Settings
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6, Switch 7, Switch 8
Initiate Link 8/4 Remote Not Channel Group Select
Dwn Device Channel Access Used When MM16 or MMH16
Line Series is selected
Load
UP = ON INTERNAL 8 CHAN ENABLED SEE TABLE BELOW
DN = OFF EXTERNAL 4 CHAN DISABLED
CURRENT SETTINGS:
DN DN DN DN DN DN DN DN
1 - 4 5 - 8 9 - 12 13 - 16 17 - 20 21 - 24 25 - 28 29 - 32
SW#6 DN UP DN UP DN UP DN UP
SW#7 DN DN UP UP DN DN UP UP
SW#8 DN DN DN DN UP UP UP UP
1 - 8 9 - 16 17 - 24 25 - 32
SW#6 DN UP DN UP
SW#7 DN DN UP UP
SW#8 DN DN DN DN
Note: Hit any key to display four position DIP Switch or control C to
abort MultiMux four position DIP Switch definitions and configurations.
Switch 1 Switch 2 Switch 3 Switch 4
Mux Mode Mux Mode Not Not
Select Select Used Used
UP = 16/32 MM
DN = 900 MMH/MMV
Current Setting:
DN DN DN DN