User guide

25
Chapter 1 - Introduction & Description
1.8.6 ISDN Terminal Adapter
Description Integral ISDN terminal adapter card
Operating Mode ISDN Basic Rate; 1B+D or 2B+D
Synchronous Data Rates 2.4–128K bps
Clocking Normal network clock (slaved to network
receive clock); private network master
(internal); external clock of DTE data
Commands Menu system
D-Channel Switch AT&T 5ESS
®
, 5E6; NT DMS-100™, BCS-32
Compatibility Siemens Stromberg-Carlson EWSD
®
,
National ISDN-1;NEC International Switch
Line Interface 2-wire ISDN Basic Rate 2B1Q U-interface;
ANSI T1.601-1992 compliant; RJ-48 jack
B-Channel Aggregation BONDING Protocol, Mode 1
1.8.7 Command Modem
Description Bell 212A/103 & CCITT V.22bis/V.22
compatible asynchronous, full duplex over
dial-up lines
Speeds 2400, 1200 and 0-300 bps
Line Interface RJ11C jack for dial-up line
1.8.8 Electrical/Physical
Voltage 115 volts AC (standard). 240 volts AC
(optional)
Frequency 47 to 63 Hz
Power Consumption 35 watts
Operating Temperature 0
O
C - 40
O
C
Dimensions 2 5/8" high x 15 3/4" wide x 11" deep; 6.7
cm high x 40.0 cm wide x 28 cm deep
Weight 12 pounds (26.4 kg)