Specifications

26 MA6
120
Cover Mounting
Screws (7)
Cover
[( )]
•
Fig. 4-3. Cover Mounting Screws
Table 4.2 Card Cage Removal Procedure (cont'd.)
Step Procedure
3 Remove the chassis mounting screw from the card cage. See Figure 4-4.
Chasis Mounting Screw
BANK 1
BANK 1
M1
M
2
M3
M
4
SOCKET
7
LOC
K
Fig. 4-4. Chassis Mounting Screw
4 Finish pulling the card cage (including fan enclosure) straight up and out of the
chassis. See Figure 4-5. Set next to chassis.
Note
Before placing card cage back into chassis, verify that power connectors from the power
supply to backplane are fully attached