Specifications

sigmadue - IEC 61131-3 Function Block Library
74
2-3-14 bAI04RT
FB Prototype bAI04RT
Input parameters
Output parameters
Description This Function Block sets the chosen input type (see the table below), acquires the
input data from the module and returns the value using the "ChX" signals in engi-
neering units (°C or mV). As inputs the FB wants the network connection, the
node identifier and the type of the sensors connected.
Input tables The configuration of the module inputs is done using the following strings. For
example, if the value “TCJ” is assigned to the signal "Ch1Type", this means that
the input channel 1 is configured as a thermocouple J.
Label Type Description
Network DWORD CAN Network Connection
NodeID USINT CANopen Device Identifier
Ch1Type ASCON_SENSOR Input Type Channel 1 (default value = PT1003)
Ch2Type ASCON_SENSOR Input Type Channel 2 (default value = PT1003)
Ch3Type ASCON_SENSOR Input Type Channel 3 (default value = PT1003)
Ch4Type ASCON_SENSOR Input Type Channel 4 (default value = PT1003)
Label Type Description
Confirm BOOL Function Block Confirm
Ch1 REAL Input1 in Engineering Units
Ch2 REAL Input2 in Engineering Units
Ch3 REAL Input3 in Engineering Units
Ch4 REAL Input4 in Engineering Units
NETWORK
NODEID
CH1TYPE
CH2TYPE
CH3TYPE
CH4TYPE
DWORD
USINT
ASCON_SENSOR
ASCON_SENSOR
ASCON_SENSOR
ASCON_SENSOR
¡
¡
¡
¡
¡
¡
BOOL
REAL
REAL
REAL
REAL
CONFIRM
CH1
CH2
CH3
CH4
¡
¡
¡
¡
¡
String Sensor
TCJ Thermocouple J
TCK Thermocouple K
TCL Thermocouple L
TCN Thermocouple N
TCR Thermocouple R
TCS Thermocouple S
TCT Thermocouple T
PT1002 PT100 – 2 wires
PT1003 (default value) PT100 – 3 wires
PT1000 PT1000 (2 wires)
MVPM1000 Linear Input ±1000 mV
MVPM50 Linear Input ±50 mV
MVPM300 Linear Input ± 300 mV