User guide

Chapter 4 - Software
Multi-Tech Systems, Inc. MultiAccess User Guide 27
Administration Screen Field Definitions
Field Name Values Description
SMTP Configuration Fields
SMTP Server Address URL or IP address Domain name or IP address for mail server
(SMTP must be supported on mail server).
SMTP Port Numeric The default SMTP Port number is 25.
Administrator E-mail Alphanumeric in
email name format
The administrator’s email address. This address
has to be entered in proper user@domain
format. Reasons for sending an e-mail;
MultiAccess is on-line, call logs full,
administrator’s e-mail address is changed.
SMTP Server User ID Alphanumeric An additional security identifier for the mail
server, that if required by the mail server is
typically a short unique name or location of the
server.
SMTP Password Alphanumeric Security code for the SMTP Server.
Retype SMTP Password Alphanumeric After the SMTP Password is entered above, an
exactly matching entry must be made here to
validate that password
Update (button) Click on this button after changes have been
made to the SMTP Server’s configuration before
the change take effect.
Time Configuration Fields
Time Server URL or IP address Location of time-tracking computer that supports
SNTP. This server is the functional substitute for
a real-time clock in the MultiAccess. It will
contact this server 5 times in 20 seconds. If
contact fails, it will try 5 times again 5 minutes
later. If contact succeeds, the MultiAccess will
update its clock periodically per an interval set in
the Request Interval option.
Add Time Server URL or IP address Used to add a user-supplied time server.
Request Interval xx days, yy hours,
zz minutes
This value (to be set by user) indicates how often
the MultiAccess will update its clock from the
Time Server.
Use Daylight Savings
Time
Check box New 2007 dates. Start DST second Sunday in
April. End first
Sunday in Nov.
Time Zone Pull-down listing Indicates the time zone in which the MultiAccess
is located.
Date Format Numeric Click on the down arrow to select the date
format.
Time Format Alphanumeric Click on the down arrow to select the time
format.
Update (button) Click on this button to make changes to Time
Configuration settings take effect.
Reset (button) Soft reboot of MultiAccess.