User guide

Chapter 3: Configuring your MultiAccess ACS
Multi-Tech Systems, Inc. MultiAccess ACS User Guide 9
Chapter 3 – Configuring Your
MultiAccess ACS
Setting Admin PC to Startup IP Address
1. Connect a PC to your network. Record the original PC’s IP address before you change it.
2. Set the PC IP address to 192.168.2.x subnet (using any address excluding 192.168.2.1).
Logging In
1. Bring up a Web browser on your PC. At the browser’s address line, type the default address of
the MA100-1M: http://192.168.2.1
and press Enter.
2. The Login screen will appear.
At this point you can be assured that the MA100-1M is connected to the network.
If the Login screen does not appear, see item #1, “What if I can’t see the web page for my MA100-1M?”
in Chapter 5: Troubleshooting.
3. At the Login screen, enter admin (all lower case) in the Username field.
4. Enter admin (all lower case) in the Password field.
5. Click the Login button. The Home screen will appear. From this screen, you can access all of
the MA100-1M software screens.