User guide

Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiAccess ACS User Guide 7
Chapter 2 – Installation
Attaching the MultiAccess ACS to a Fixed
Location
The MultiAccess is design to be used on the desktop or to be panel-mounted. To attach the bracket for
panel-mounting, following these steps:
1. Typically, the MultiAccess is mounted against a flat surface with two mounting screws. Drill the
mounting holes at the desired location. The mounting holes must separated by 4
15
/16 inches center-
to-center.
Screw Separation
15
16
inches4
2. To attach the bracket to the MultiAccess, slide the mounting bracket into the corresponding slots on
the back of the MultiAccess chassis.
3. Attach the adapter to the surface with two screws.