User guide

Appendix E – MCSI2000 Parameters
Multi-Tech Systems, Inc. MultiAccess ACS User Guide 43
Appendix E – MCSI2000 Parameters
Setting Up MCSI2000 Com Port Redirector
Add one MCSI2000 com port to your workstation. Reboot the workstation. The properties of the
MCSI2000 com port should be:
• Connect Time = 0
• Direct (Not MAG)
• Use Line Defaults Yes
• Server IP address is that of the MultiAccess
• Protocol Telnet
• Port Number 7000
• Authentication No.
For further details on how install and operate MCSI200, refer to the MCSI For Windows 2000 and XP
Software Installation Guide on your product CD.