User guide

Appendix A – Device Manager Utility
Multi-Tech Systems, Inc. MultiAccess ACS User Guide 37
7. The updating process will take as long as a minute. During this time, several messages will
appear in the Update MultiAccess ACS N.N.N.N window. A transient TFTP screen may
appear briefly. If the updating process has been successful, the final message line will say
“Finished – The MultiAccess ACS is ready.”
8. Close the Update MultiAccess ACS N.N.N.N window. In the main Device Manager window,
the updated version will be listed.
9. Repeat steps 1-8 for each MultiAccess ACS unit in the system.
NOTE: For proper operation of the MultiAccess ACS system, including the sharing of the Local
Users data base data, the firmware version for all MultiAccess ACS units must be the same.
10. The updating process is now complete.