User guide

MultiAccess ACS
Radius Client Setup points to the Radius Server when the
Authentication is Radius.
Authentication
1. In the Authentication Type, if your database for user
credientals resides in the Local User Database on the
MultiAccess, then accept the default – local. If your user
database resides on the Radius Server outside the
MA100-M, then click on the down arrow and chose
radius.
2. For RAS calls, enter a static IP Address in the Remote
Host Address window which will be assigned to the dial-in
user. This Remote Host Address has to match the network
number that the MultiAccess is on.
RADIUS
1. If you are setting up MultiAccess to use Radius
authentication, then enter the IP address of the primary
RADIUS Server in the RADIUS Server Address 1 window.
14