Specifications

34 CommPlete 4000 Communications Server Quick Start Guide
Regulatory Information
d. The user should not issue any sequence of commands to the modem which would cause the
modem to exceed the maximum allowable pause of 8 seconds from the time the modem goes off
hook until dialing begins.
e. For correct operation of the call progress monitor, the power has to be properly connected and
switched on.
Compliance with BS6328 Part 1
a. The modem is not suitable for use on circuits with British Telecommunications signaling at a
normal frequency of 2280 Hz.
b. The modem does not require signaling or otherwise employ the frequency range dc to 200 Hz.
c. The modem does not require dc from the Private Circuit for correct operation. The modem may be
damaged if connected, in a private circuit mode, to a circuit supplying dc current (the maximum
permissible direct current is zero amps).
c:\jeff\modems\int'l
<ce.fh4> <ce.eps>
EMC, Safety, and Terminal Directive Compliance
The CE mark is affixed to this product to confirm compliance with the following European Community
Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of laws of Member States relating to
electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States
relating to electrical equipment designed for use within certain voltage limits;
and
Council Directive 98/13/EEC of 22 March 1998 on the approximation of the laws of the Member States
concerning telecommunications terminal and satellite earth station equipment.