User guide

88
Chapter 5 - AT Commands
General Information Commands
In Display Product
Information
Ln List Active Profile
Information
!L Display Network
Configuration
>MIBn Management Information Block Information
NetworkConfiguration %A97 Dialing method
>A0=n Type of Coding (Speech/3.1 kHz audio)
!C0 Switch type
!C6 SPID 1
*!C6 SPID 2
!D0=n V.120 LLC Info Element
!D3 SAPI-0 data TEI
*!D3 SAPI-0 modem TEI
!L List DN, SPID, TEI, Data
protocol & switch type
>Dn Embedded Protocol Analyzer
!N1, !N2, !DN1, !DN2, !EN1, !EN2 Data DN/MSN
*!N1, *!N2, *!DN1, *!DN2, *!EN1, *!EN2 Modem DN/MSN
>MULT=n Multi-Point Setting
Serial Port Configuration Commands
L List telephone numbers
L5 List current operating parameters
L6 List S-register values
L8 Display low level ISDN status
MIBn Management Information Block information
&Cn DCD (Data Carrier Detect) control
&Dn DTR (Data Terminal Ready) control
&En Flow control
#Xn Send Single MultipleXoff Characters
&Rn CTS (Clear To Send) control
&RFn CTS/RTS InteractionControl
&Sn DSR (Data Set Ready) control
&V View port configuration
DSn Dial a Stored telephone number
$Dn Persistent DTR dialing