User guide

Chapter 3 - Software Installation

3.8 Removing ISIHx Card and Driver in Windows NT 3.51/4.0

1. Go to

Start | Settings | Control Panel | Network

. Click on the Adapters tab.

2. Select "MultiTech 4, 8, 16-port ISI card," and then click Remove.

Note: To complete the uninstall procedure, restart your computer.

3.8.1 I/O Addresses and IRQ Codes

Unlike the ISIHI, the ISIHP has no DIP switch for I/O addresses and no jumper to determine the IRQ code.

The input/output address and the interrupt request code (IRQ) for the ISIHP are assigned automatically during

driver installation. During any subsequent re-configuring of your PC, you may need to know the assigned I/O

address and IRQ code. To determine the I/O address and IRQ assigned to the ISIHP:

• Click on

Start | Settings | Control Panel

and select the ISI Cards icon (for Windows NT)

• Click on

Start | Programs | Administrative Tools (Common) | Windows NT Diagnostics | Resources