User guide

27
Chapter 3 - Software Installation
16. The Install New Modems screen will appear. Select “Don’t detect my modem ....”. Click Next.
17. A screen listing modem manufacturers and models will appear. Click “Have Disk ....”
18. The Install from Disk screen will appear. Type or browse for the file path of the modem software (for
example,
E:\servcard\drivers\win2000 ). Click OK.
19. The Install New Modem screen will show a list of MultiTech modem and terminal adapter drivers. Select
the modem type that fits the model of your specific server card.
• For 1S/2S/4S models, select “ISIHI_HP-2S Central Site 56K Modem". Click Next
• For 2U/4U models, select “ISIHI_HP-2U Central Site 56K Modem". Click Next.
20. The Install New Modem port list screen will appear. Highlight the COM ports on which you want modems
to be installed. You must allocate 8 ports for the ISIHP-4S/4U, or 4 ports for the ISIHP-2S/2U/1S, or 4
ports for the ISIHI-2S/2U. Click Next.
Note: The ISIHP-1S supports only two modems, but you must designate 4 ports during installation.
Note: The COM port numbers used must allow for 4 terminal adapter ports, even though 2 terminal adapter
ports will remain unused. For example, if you allocated COM3, COM4, COM5, and COM6 to terminal adapters
for the ISIHP-1S, you could allocate COM7, COM8, COM9, and COM10 to modems for the ISIHP-1S. COM5,
COM6, COM9, and COM10 would be unused by the ISIHP-1S and so could be allocated to a different function
after installation of the ISIHP-1S is complete.
21. A progress screen will appear as modem installation begins.
22. Screens denoting the installation of modems to specific COM ports will appear.