User guide

Chapter 3 - Software Installation

3.4 ISIHx for Win 2000: Installing ISI Management Software (server

OSs only)

If you are using a Windows 2000 Server operating system ("Server" or "Advanced Server"), you must decide

whether you want to use the MultiTech ISI Management Software in conjunction with your ISIHx board. The

ISI Management Software is shipped with the ISI card.

1. Turn on your computer and start Windows 2000.

2. Insert the CD-ROM containing the ISI Management Software into your CD-ROM drive.

3. Go to

Start | Run

. In the Run window, enter the file path of the ISI Management software. Typically, this

would be

E:\SERVCARD\UTILITY\MGMT\SETUP.EXE

. Click OK.

4. The ISI Management setup screen appears. At the Welcome screen, click Next.

5. A progress screen appears while files are copied. If the Error Creating WWW Server message appears, it

may indicate that there was an attempt to install the ISI Management Software on a client version of

Windows 2000. (The ISI Management Software can be installed only in the

Windows 2000 Server

and

Windows 2000 Advanced Server

operating systems.)

6. A completion screen appears. Select "Yes, I want to restart my computer now" and click Finish.

7. After the computer has restarted, the installation of the driver and of the ISI Management Software will be

complete.