Specifications

29
Chapter 3 - Driver Installation
11. Type Y (yes) to accept the prefix for tty ports. For further details
see MultiTech Installation Script step 3.
12. Type Y (yes) to confirm the selection. For further details see
MultiTech Installation Script step 4.
13. After the driver is installed, press <Enter> to continue. For further
details see MultiTech Installation Script step 4 (last paragraph) and
step 5.
14. Exit the custom utility. For further details see MultiTech
Installation Script step 6.
15. Remove the floppy disk and reboot your computer. For further
details see MultiTech Installation Script step 7.
MultiTech Installation Script
The Multi-Tech Installation Script for SCO Open Server 5 systems
requests information about how many boards you want to install,
designations for communication ports and printer ports, and how
many pseudo devices you want to create for Multi_View utility. Based
on this information, the appropriate driver files will be installed and
linked with your system’s kernel.
1. This text appears on the screen:
You can install up to 4 ISA/PCI cards in a
system. The PCI cards will be autodetected on
bootup. Enter the number of ISA cards you
want to install and configure on your system
(0-4).
Select 0 if your computer has a PCI bus. This tells the SCO
operating system to autodetect the ISI cards.
For ISA-bus cards like the ISI4608, type 1, 2, 3, or 4, depending on
how many cards you want to install in the computer.
2. The following text appears on the screen:
Multi_View is a utility which will allow you
to have multiple sessions on terminals that
have multiple pages of physical memory. In
order for this utility to work with
MultiTech’s serial cards, pseudo devices have