Specifications

23
Chapter 3 - Driver Installation
6. Launch the setup program. (From Windows Explorer, double-click on
setup.exe; from the Run menu, click OK.)
7. The installation wizard will begin running. At the Welcome screen,
click Next.
8. Under Select Type of Card, check the Install ISA Card box. Click
Next.
9. Specify the number of ports on the card as 8.
10. A message screen appears.
Click OK.
11. A completion screen appears.
Click OK.
12. The System Properties | Device Manager screen appears. Highlight
MultiTech ISI Card. Click Properties.
13. The MultiTech ISI Card Properties screen appears.
Click on the Resources tab.
14. Click on Set Configuration Manually.
15. Set the "Input/Output Range" to match the Base I/O Setting that
you specified on the hardware DIP switch in Step 2 above. Set the
"Interrupt Request" to match the IRQ setting you specified on the
hardware jumper block in Step 2 above. To alter these parameters,
click on the Change Setting button.
16. When editing of IRQs and Base I/O Address settings is
complete, click OK. Then click OK at the Resources screen.
The System Settings Change screen appears.
17. When prompted about re-starting your computer, click Ye s.
18. When the computer is restarted, the software installation will be
complete.