Specifications

Chapter 3 - Driver Installation

8. The Select OEM Option dialog box appears. Click OK.

A transient dialog box will appear indicating the progress of the

setup program.

9. The ISI Cards dialog box appears. Click Add.

10. Then the ISI Card Settings dialog box appears. Enter the

correct port count: allocate 8 ports for each ISI4608 card. Select the

first port number for ISI modems, which is usually COM3.

Click "ISA" in the Bus Type field. Enter the Base I/O Address and

IRQ as in Step 2 above.

11. The ISI Cards dialog box appears again and shows the port

resource allocation just made. To add more cards, click Add and

repeat Step 9.

After the last ISI card has been added, click Close.

12. The file is copied and "Multi-Tech 4, 8, 16-port ISI Card" appears

in the Network Adapters box. Click Close.

13. When prompted about restarting your computer, click Ye s.

The ISI4608 card software is now installed in Windows NT.

Removing ISI4608 Card and Driver in Win-

dows NT 3.51/4.0

1. Go to Start | Settings | Control Panel | Network. Click on the

Adapters tab.

2. Select "MultiTech 4, 8, 16-port ISI card," and then click Remove.

To complete the un-install procedure, restart your computer.