Specifications

18
ISI4608 Quick Start Guide
Select the value that matches the Base I/O Address value that you
have already set on the ISI4608 board in Step 2. Click OK.
B. In the Resource Settings field, select "Interrupt Request" and click
on Change Setting. The Edit Interrupt Request screen appears.
Select the value that matches the IRQ value that you have already
set on the ISI4608 board in Step 2. Click OK. At the Resources tab,
click OK again.
14. At the Start Hardware Installation screen, click Next.
15. A completion screen appears.
Click Finish.
16. You will be prompted to restart your computer. Click Yes.
ISI4608 for Windows 2000: Installing ISI
Management Software (server OSs only)
If you are using a Windows 2000 Server operating system ("Server" or
"Advanced Server"), you must decide whether you want to use the
MultiTech ISI Management Software in conjunction with your ISI4608
board. The ISI Management Software is shipped with the ISI card.
1. Turn on your computer and start Windows 2000.
2. Insert the CD-ROM containing the ISI Management Software into
your CD-ROM drive. (If ISI Management Software has been
downloaded from the MultiTech web site, it will typically be on a
diskette. In that case, insert diskette into floppy drive).
3. Go to Start | Run. In the Run window, enter the file path of the ISI
Management software. Typically, this would be
E:\SERVCARD\UTILITY\MGMT\SETUP.EXE.
Click OK.
4. The ISI Management setup screen appears. At the Welcome screen,
click Next.
5. A progress screen appears while files are copied. If the Error
Creating WWW Server message appears, it may indicate that there
was an attempt to install the ISI Management Software on a client