User guide

ISI3334-4/8 Quick Start Guide
28
SCO Open Server 5 Driver Installation
The ISI driver for SCO Open Server 5 is shipped on CD-ROM (FAT file system) and can also be downloaded from
the Multi-Tech web site. In both cases, the driver files are compressed (tarred). Users installing from the CD-
ROM should begin at To install from CD-ROM directly below. Users installing from a floppy disk should skip down
to To install driver from floppy disk later in this section. The filename of the SCO5 driver in its tarred form is
isisco.tar.
This present installation section is task-oriented with minimal explanation of procedural steps. The section Multi-
Tech Installation Script, which immediately follows this section, presents additional details to aid in installation.
To install from CD-ROM:
# mount -r /dev/cd0 /mnt
# cd /mnt
# cd servcard/drivers/sco50x
#cp isisco.tar /
# cd <ENTER>
To format a floppy disk for SCO5:
1. At the Unix prompt, run the scosh program.
2. Select Manager.
3. Select Archive.
4. Select Format.
5. Make sure that Device is pointed to the floppy drive.
6. Select Continue.
To untar the driver file and copy files onto floppy disk:
1. Make a temporary directory for the ISI driver files..
# mkdir /isi
2. Copy the tarred isi driver file into the temporary directory.
# cp sco50x.tar /isi
3. Untar this file and put its contents into the temporary directory.
# cd /isi
# tar xf sco50x.tar
4. Copy the untarred (inflated or non-compressed) files to a floppy disk
# cd /isi/unifiedinstimg
#scosh
- Select Manager.
- Select Archive.
- Select Create.
- Press space bar to highlight tmp/ and usr/ directories.
- Press <Enter> to copy.