User guide

Chapter 2 - Installation
21
6. Launch the setup program. (From Windows Explorer, double-click on setup.exe; from the Run menu, click OK.)
7. The installation wizard will begin running. At the Welcome screen, click Next.
8. In the ISI Device Driver Setup dialog box, under Select Type of Card, check the Install ISA Card box. Click Next.
9. The ISI Card Port Count dialog box appears.
For ISI3334-4, specify the number of ports on the card as 4.
For ISI3334-8, specify the number of ports on the card as 8.
Click Next.
10. The following message appears in the ISI Driver Setup dialog box: "Installing ISI ports. This will take a few minutes.
Click OK to proceed." Click OK.
11. This completion message appears: "ISA card was successfully installed. You need to set the base address and IRQ for the
card. Please select the MultiTech ISI Card under MultiPort in Device Manager and then select the Properties to change
the settings." Click OK.
12. The System Properties | Device Manager screen appears. Highlight MultiTech ISI Card. Click Properties.
13. The MultiTech ISI Card Properties screen appears.
Click on the Resources tab.