User guide

Chapter 2 - Installation
17
3. Turn on the PC and start Windows NT.
4. Insert the ISI driver CD-ROM into the CD-ROM drive. (In some cases, drivers may be downloaded from the MultiTech
web site and saved onto diskette. If so, insert diskette into floppy driver now.)
5. Click Start | Settings | Control Panel | Network | Adapters. Then click Add.
6. The Select Network Adapter dialog box appears. Click Have Disk.
7. The Insert Disk dialog box appears. Type the path (file directory location) of the Windows NT driver. Click OK.
8. The Select OEM Option dialog box appears. Click OK.
A transient dialog box will appear indicating the progress of the setup program.
9. The ISI Cards dialog box appears. Click Add.
10. Then the ISI Card Settings dialog box appears. Enter the correct port count:
 allocate 4 ports for the ISI3334-4;
 allocate 8 ports for the ISI3334-8.
Select the first port number for ISI modems, which is usually COM3.
Click "ISA" in the Bus Type field. Enter the Base I/O Address and IRQ as in Step 2 above.
11. The ISI Cards dialog box appears again and shows the port resource allocation just made. To add more cards, click
Add and repeat Step 9.