User guide

Chapter 2 - Installation
15
Installing Modems to COM Ports in Windows 2000
1. After the ISI driver has been installed and rebooting is complete, the ISI ports will be detected (the Found New
Hardware screen will appear).
2. When all of the modem ports of the ISI3334 have been detected, the Found New Hardware Wizard -
Welcome screen will appear. Click Next.
3. The Install Hardware Device Drivers screen will appear. Select "Search for a suitable driver ... ." Click Next.
4. The Locate Driver Files screen will appear. Select "CD-ROM drives ... ." Click Next.
5. The Driver Files Search Results screen will appear. Click Next.
6. A completion screen will appear. Click Finish.
7. The Found New Hardware screen will appear repeatedly, once for each modem on the ISI3334 card (4 or 8
times, depending on the model).
8. To confirm the installation of the ISI3334 modems to COM ports, go to Start | Settings | Control Panel |
System. Click on the Hardware tab. Click on the Device Manager button.
9. Installation of ISI3334 modems to COM ports is complete.