Specifications

Chapter 1 - Introduction and Description

Your MultiModemISI also features Remote Configuration which

permits you to assist users at remote sites, saving you the time and

trouble of site visits and preventing misinterpretation of configuration

instructions.

1.3 Fax Features

Your MultiModemISI meets the CCITT V.17 standard for sending

and receiving faxes. When linked to a compatible fax machine or

modem, it can transmit faxes at 14.4 K bps. It also meets the

CCITT’s Group 3 Designation for sending and receiving faxes at

9600 bps; and Group 2 Designation for sending and receiving faxes

at 4800 bps. The MultiModemISI is also downward-compatible to

speeds as low as 300 bps, so it can send and receive faxes with

virtually any fax machine in the world.

1.4 Product Description

The MultiModemISI is ideally suited to use in PC networks

environments because it provides an integrated hardware solution

for remote access for both Windows NT and Novell-based LANs. In

particular, to ensure smooth Novell network integration, the

MultiModemISI ships with NetWare Loadable Module for NetWare

Connect

communication servers that enable it to support state-of-

the-art features such as remote dialing and modem pooling. And,

the MultiModemISI easily integrates into the Windows NT platform

since it fully supports Microsoft's Remote Access Server software.

This allows it to comfortably operate with popular network protocols

such as TCP/IP and NetBIOS. The MultiModemISI ships with drivers

for other multiuser operating systems such as SCO

UNIX

, SCO

Xenix

, and SCO UNIXWare

The MultiModemISI includes an Intel 16 MHz 80186 proccesor and

256K of RAM that work dynamically to allocate resources to the

most active modems.

Simple to install, the MultiModemISI can be used to add multiport,

Enhanced

V.34 modem communications to a network host or server

as easily as plugging in an expansion card, running the driver

software, and connecting the phone lines.