Specifications

ISI3334/4 Hardware/Driver Installation Manual
46
7. To confirm your port(s) are programmed correctly, return to the
MAIN MENU and highlight the "Configure" option. In the "ISI
Port Number" option, note which port is active (e.g., port 1 or
port 7). Return to the MAIN MENU and highlight the
"Communicate with the Port" option. At this point, you should be
able to issue AT commands to that corresponding port.
8. If you need more assistance programming FLASHPRO, contact
our tech support department.
3.5 About CompuServe/Internet
In addition to the BBS, Multi-Tech provides support through
CompuServe's Modem Vendor Forum ( GOMODEMVEN ) under GO
MULTITECH . Refer to your CompuServe documentation for special
operating procedures.
Multi-Tech is a commercial provider on the Internet, and we retrieve
e-mail messages from the following mailboxes on a periodic basis:
[e-mail] Marketing Dept.
[e-mail] Sales Dept.
[e-mail] International Marketing & Sales
[e-mail] Publications Dept.
If you prefer to receive support via the Internet, you can contact
Tech Support via e-mail at:
http://www.multitech.com/_forms/email_tech_support.htm
Multi-Tech's presence includes a Web site at:
http://www.multitech.com
and an ftp site at:
ftp://ftp.multitech.com