Specifications

Chapter 2 - AT Commands, S-Registers and Result Codes
15
COMMAND: D s
VALUES: s = phone #
DEFAULT: n/a
DESCRIPTION: Dial a telephone number “s” , where s may
include up to 60 digits or T, P, R, comma
and ; characters.
COMMAND: D s N d
VALUES: s = phone # and d = 0 thru 9
DEFAULT: n/a
DESCRIPTION: Store telephone number. To store, phone
number ”s“ is entered and followed by N
and then Directory Number “d.”
COMMAND: &D n
VALUES: n = 0 thru 3
DEFAULT: &D2
DESCRIPTION: &D0 means DTR is ignored
&D1 means modem returns to command
mode.
&D2 lets modem react to DTR normally.
&D3 causes modem to reset to modem
default parameters.
COMMAND: $D n
VALUES: n = 0 or 1
DEFAULT: $D0
DESCRIPTION: $D0 disables DTR Dialing.
$D1 enables DTR Dialing.
COMMAND: %DF n
VALUES: n = 0 or 1
DEFAULT: %DF0
DESCRIPTION: %DF0 selects V.34 Line Probe Data in Graph
Format.
%DF1 selects V.34 Line Probe Data in Table
Format.