User guide
Appendix C: Troubleshooting
CommPlete 4000 Server SBC, Model IPC-551 81
Memory Address Error: If the memory address indicates an error, use
the specified location and the memory map for your system to find and
replace the bad memory chips.
Memory Size Has Changed: Memory has been added or removed
since the last boot. In EISA mode, use the Configuration Utility to re-
configure memory. In ISA mode, enter the BIOS Setup screen and type
the new memory size in the memory field.
Memory Verifying Error : It indicates an error verifying a value
already written to memory. Use the specified memory location and
your systems memory map to locate the bad chip.
Offending Address Missing: This message is used in connection
with the I/O CHANNEL CHECK and RAM PARITY ERROR messages
when the segment that has caused the problem cannot be isolated.
Reboot Error: When this error occurs, you must re-boot. Press any
key and the system will re-boot.
System Halted: Indicates that the present boot attempt has been
aborted and the system must be re-booted. Press and hold down the
CTRL and ALT keys and press DEL.