User guide

64 CommPlete Series 4000 Server SBC, Model IPC-551
Award BIOS Setup
5-10 Integrated Peripherals
If you choose INTEGRATED PERIPHERALS from the CMOS Setup
Utility menu, this screen will appear:
Esc: Quit
F1: Help
F5: Old Values
F6: Load BIOS Defaults
F7: Load Setup Defaults
Pu/Pd/+/-: Modify
(Shift) F2: Color
:SELECT ITEM
ROM / PCI / ISA BIOS (2A59FP6C)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode :Enabled
PCI Slot IDE 2nd Channel :Enabled
On-Chip Primary PCI IDE :Enabled
On-Chip Secondary PCI IDE :Enabled
IDE Primary Master PIO :Auto
IDE Primary Slave PIO :Auto
IDE Secondary Master PIO :Auto
IDE Secondary Slave PIO :Auto
USB Controller :Enabled
USE Keyboard Support :Disabled
Onboard FDC Controller :Enabled
Onboard UART 1 :Auto
UART 1 operation mode :Standard
Onboard UART 2 :Auto
UART 2 operation mode :Standard
Onboard Parallel Port 378/IRQ7
Parallel Port Mode :Normal
Figure 5-8: Integrated Peripherals
5-11 Password Setting
Access to the computer system in general or to the BIOS settings in
particular can be put under password protection using this function.
When you select PASSWORD SETTING on the CMOS Setup Utility
menu, the following dialog box will appear at the center of the screen
to assist you in creating a password.
Enter Password
Type the password, up to eight characters in length, and press
Enter. The password typed now will clear any previously entered
password from CMOS memory. You will be asked to confirm the
password. Type the password again and press Enter. You may also
press Esc to abort the selection and not enter a password.