User guide

CommPlete Series 4000 Server SBC, Model IPC-551 63
Award BIOS Setup
controller supports two separate hard drives, you can select the
interrupt number (the INT#; the possible values are A, B, C, or D)
for each. Note that the primary drive always has a lower interrupt than
the secondary drive.
Onboard PCI SCSI Chip
Default is Disabled. The IPC-551 SBC does not support SCSI.
5-8 Load BIOS Defaults
Auto Configuration with BIOS Defaults
Choosing LOAD BIOS DEFAULTS from the CMOS Setup Utility menu
will restore default BIOS values to the PC. Invoking LOAD BIOS
DEFAULTS will bring up this dialog box:
Load BIOS Default ( Y ? N ) ? Y
To use the BIOS defaults, change the prompt to Y and press
Enter ; the default BIOS values will be loaded into CMOS
automatically the next time you power up the IPC-551. Load BIOS
Defaults are the same as Load Setup Defaults.
5-9 Load Setup Defaults
Auto Configuration with Setup Defaults
Choosing LOAD SETUP DEFAULTS from the CMOS Setup Utility
menu will restore default SETUP values to the PC. Invoking LOAD
SETUP DEFAULTS brings up this dialog box:
Load SETUP Default ( Y ? N ) ? Y
To use the SETUP defaults, change the prompt to Y and press
<Enter>; the default SETUP values will be loaded into the CMOS
automatically the next time you power up the IPC-551. Load Setup
Defaults are the same as Load BIOS Defaults.