User guide

CommPlete Series 4000 Server SBC, Model IPC-551 59
Award BIOS Setup
5-6 Power Management Setup
The Power Management Setup allows you to configure your system to
save energy most effectively while still meeting your computing
needs. When you specify Max Saving, all power-saving timeouts
are set to their minimum value and power saving is implemented at the
lowest possible threshold.
Esc: Quit
F1: Help
F5: Old Values
F6: Load BIOS Defaults
F7: Load Setup Defaults
Pu/Pd/+/-: Modify
(Shift) F2: Color
:SELECT ITEM
ROM / PCI / ISA BIOS (2A59FP6C)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management :Disable
PM Control by APM :Yes
Video Off Method :V/H SYNC + Blank
MODEM Use IRQ :3
Doze Mode :Disable
Standby Mode :Disable
Suspend Mode :Disable
HDD Power-Down :Disable
**Wake Up Events in Doze & Standby **
IRQ3 (Wake-Up Event) :ON
IRQ4 (Wake-Up Event) :ON
IRQ8 (Wake-Up Event) :ON
IRQ12 (Wake-Up Event) :ON
** Power-Down & Resume Events **
IRQ3 (COM 2) :ON
IRQ4 (COM 1) :ON
IRQ5 (LPT 2) :ON
IRQ6 (Floppy Disk) :OFF
IRQ7 (LPT1) :ON
IRQ8 (RTC Alarm) :OFF
IRQ9 (IRQ2 Redir) :ON
IRQ10 (Reserved) :ON
IRQ11 (Reserved) :ON
IRQ12 (PS/2 Mouse) :ON
IRQ13 (Co-Processor) :ON
IRQ14 (Hard Disk) :ON
IRQ15 (Reserved) :ON
Figure 5-7: Power Management Setup
Power Management
This field lets you select the type (or degree) of power saving used.
There are four modes of power management:
1. Doze Mode
2. Standby Mode
3. Suspend Mode
4. HDD Power Down
There are four selections for Power Management, three of which have
fixed mode settings.
Disable (default) No power management. Disables all four
modes