User guide
52 CommPlete Series 4000 Server SBC, Model IPC-551
Award BIOS Setup
Boot Sequence
This setting determines which drive to search first for booting files at
startup. The default value is C, A.
C, A System will first search for hard disk drive then floppy disk
drive.
A, C System will first search for floppy disk drive then hard disk
drive.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed has
40 or 80 tracks. 360K type has 40 tracks while 760K, 1.2M and 1.44M
are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine
if it is 40 or 80 tracks. Note that BIOS can not
tell from 720K, 1.2M or 1.44M drive type as they
are all 80 tracks (Default).
Disabled BIOS will not search for the type of floppy disk
drive by track number. Note that there will not
be any warning message if the drive installed is
360K.
Boot Up NumLock Status
This allows you to determine the default state of the numeric keypad.
By default, the system boots up with NumLock on.
On Keypads number keys are active.
Off Keypads arrow keys are active.
Boot Up System Speed
Selects the default system speed the normal operating speed at
power up.
High Sets the speed to high (default)
Low Sets the speed to low