User guide

Software Configuration

34 CommPlete 4000 Server SBC, Model IPC-551

(B) Select Change Display Type...(Alt-C)

(D) From the Select Device window, choose Other.

(E) Insert the CHIPS WinNT driver disk into the appropriate floppy

drive and click OK.

(F) Click on Install. Then, follow the prompts on the screen.

4. Installing the VGA driver into Windows NT 4.0

(A) Click on Start | Settings | Control Panel.

(B) On the Control Panel, click on Display| Settings |

Display Type.

of the Display Properties window.

(D) In the Change Display Type window, click on the Have

Disk button under Display Type. This will bring up the

Install from Disk window.

(E) Place the diskette containing the video driver into floppy drive A.

(F) In the Select Device window, click on the Other

button. Enter the source directory where the Windows NT driver

files are located (usually a:\winnt40). Press <ENTER>.

(G) The name of the Chips and Technologies Video Accelerator driver

will appear in the Display list box. Double-click on the driver.

Once the installation is complete, the system must be shut down

and restarted.

(H) Upon restart, select the desired display settings from the

Display Properties dialog box. Click on Test to test the

newly selected graphics mode.

(I) A color test screen should appear, followed by the Testing

Mode window. Click Yes to continue.

(J) The Display Properties window will appear. Click on OK

for the new settings to take effect.