User guide

Software Configuration
CommPlete 4000 Server SBC, Model IPC-551 33
3-1-2. Installing the VGA Driver for PCI
Each procedure below explains how to install the VGA driver into a
particular operating system (Windows 3.1, Windows 95, Windows NT,
or OS/2 Warp).
1. Installing the VGA driver into Windows 3.1
(A) To install the VGA driver into Windows 3.1, insert Utility Disk#1
into the floppy disk drive (drive A or B). Using File Manager, go to
the win31directory where the VGA driver files are located.
(B) Click on the Setup.exe file to launch installation of the VGA
driver.
(C) Follow the instructions presented on the screen and complete the
installation.
(D) After the installation is complete, you must shut down and restart
the system in order for the changes to take effect.
2. Installing the VGA driver into Windows 95
(A) Click on Start | Settings | Control Panel.
(B) On the Control Panel, click the Display icon and enter the
Settings tab of the Display Properties window.
(C) Click on Change Display Type.
(D) In the Change Display Type dialog box, select Adapter
Type, and click on Change. The PC will compile a list of devices
that it supports.
(E) When the Select Device dialog box appears, click on Have
Disk.
(F) Click on Browse and select the Win95 file on the diskette.
(G) Select Chips & Tech 65550 PCI Video Driver.
(G) Follow screen instructions to completion.
3. Installing the VGA driver into Windows NT 3.5
(A) From the Main group, select Control Panel and click on the
Display icon.