Multi-Tech Model IAC-F696 Single Board Computer for CommPlete 4000 Server USER'S MANUAL
Copyright and Technical Support CommPlete 400 Single Board Computer (IAC-F696) User Guide PN S000349A Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2002-2004, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc.
Table of Contents TABLE OF CONTENTS Chapter 1 – General Information ..................................................................................................................................4 Introduction ................................................................................................................................................................4 Features ...............................................................................................................................
Chapter 1 – General Information Chapter 1 – GENE RAL INFORMATION Introduction IAC-F696 With its rich AGP V1.0 Compliant 2X integrated graphics capabilities, flexible FSB settings, and support for PC133 DRAM, delivers excellent levels of scalability and performance on a costeffective, High integrated platform designed for the specific needs of the Automation, DVR, Information PC, and Internet Appliance market segments.
Chapter 1 – General Information Technical Specification IAC-F696 Series Processor System Bus Memory Graphic Ethernet EIDE I/O Interface CPU Max. Speed L2 Cache VIA C3 EBGA 1GHz s 1GHz Integrated 192KB Cache (two 64KB L1 Cache and 64KB L2) Chipset VIA VT8601T (NB)+VT82C686B (SB) BIOS FSB PCI Technology Max.
Chapter 2 - Installation CHAPTER 2 – INSTALLATION Hardware Setup and Installation System Memory Installation Step1: Open latches of DIMM socket. Step2: Insert the RAM module into the DIMM socket. Step3: Press the latches into the notches of the RAM module. Compact Flash Installation Multi-Tech Systems, Inc.
Chapter 2 - Installation Jumper Settings and Connectors Board Outline COMB1 PKM1 COMA1 SC2T2 SC2T1 LANB1 IRDA1 VGAA1 SBVB1 SM1 KBPW1 LNB1 PLRS1 FDCA1 KCN1 ATXD1 LPTA1 IDEB2 USBF2 USBF1 IDEB1 FAN1 South Bridge PSW1 SCF1 LVDSE CMOS1 VLCD1 North Bridge DIMMA3 DIMMA2 DIMMA1 FAN2 CPU Multi-Tech Systems, Inc.
Chapter 2 - Installation Jumper Settings Summary Jumper SC2T1/SC2T2 VLCD1 CMOS1 PLRS1 SCF1 KBPW1 SBVB1 SLVA1 Function Select COM2 Type Select Panel Voltage Clear CMOS Data Power LED, HD LED, Reset, Speaker Connector Master/Slave Select PS/2 Keyboard/Mouse Select power mode 12/24 Bit Input Mode Select SC2T1/SC2T2: Select COM2 Type COM2 TYPE RS-232 (Default) RS-422 RS-485 SC2T1 1-2 3-4 5-6 Default: SC2T1 1 3 5 2 4 6 SC2T2 1-5,2-6,3-7,4-8 5-9,6-10,7-11,8-12 5-9,6-10,7-11,8-12 SC2T2 1 3 5 2 4 6 SC2T2
Chapter 2 - Installation VLCD1: Select Panel Voltage Panel Voltage +3.3 V (Default) +5 V Default: VLCD1 1-2 2-3 VLCD1 3 2 1 VLCD1 VLCD1 3 3.3V (Default) 2 1 5V 3 2 1 3 2 1 VLCD1 CMOS1: Clear CMOS Data Description Normal (Default) Clear CMOS CMOS1 1-2 2-3 CMOS1 Normal (Default) Clear CMOS1 1 2 3 1 2 3 CMOS1 1 2 3 CMOS1 Multi-Tech Systems, Inc.
Chapter 2 - Installation PLRS1: Power LED, HD LED, Reset, Speaker Connector (11 Pin 2.54mm) Pin No. 1 2 3 4 5 6 7 8 9 10 11 Description Power LED + Power LED + GND HDD LED + HDD LED RESET SW + RESET SW – (GND) External Speaker Internal Buzzer NC External Speaker + PLRS1 Default : 8-9 (ON) Internal Buzzer 1 PLRS1 11 SCF1: Master/Slave Select Compact Flash Card Master Slave ATA Disk Chip Slave Master SCF1 1-2 2-3 (Default) SCF1 1 3 SCF1 Multi-Tech Systems, Inc.
Chapter 2 - Installation KBPW1: 1x3 Pin 2.54mm PS/2 Keyboard/Mouse +5V (Default) +5V STANDBY KBPW1 1-2 2-3 KBPW1 KBPW1 1 3 SBVB1: Select power mode MODE AT ATX SBVB1 1-2 2-3 SBVB1 SBVB1 1 3 Multi-Tech Systems, Inc.
Chapter 2 - Installation SLVA1: 12/24 Bit Input Mode Select Bit Input Mode Select 24 bits Mode 12 bits Mode SLVA1 1-2 (Default) 2-3 SLVA1 1 3 SLVA1 I/O Connector Summary CONNECTOR ATXD1 IRDA1 USBF1/ USBF2 FAN1/ FAN2 PSW1 IDEB1 / IDEB2 FDCA1 LPTA1 COMA1 COMB1 LANB1 VGAA1 PKM1 KCN1 LNB1 SM1 DIMMA1/2/3 LVDSE1 FUNCTION For ATX Function IRDA1 Connector USB Port #1 & #2 Connector (2¯5 Pin 2.54mm) 3 Pin FAN Connector ATX Power Button IDE Interface Connector (40Pin 2.
Chapter 2 - Installation ATXD1: For ATX Function Pin No. 1 2 3 Description PSON GND +5V STANDBY ATXD1 ATXD1 1 3 IRDA1: IRDA1 Connector Pin No. 1 2 3 4 5 Description VCC NC IRRX GND IRTX IRDA1 IRDA1 1 5 Multi-Tech Systems, Inc.
Chapter 2 - Installation USBF1/USBF2: USB Port #1 & #2 Connector 2x5 Pin 2.54mm Pin No. 1 3 5 7 9 Description USB_VCC Key USBD0-/2USBD0+/2+ Ground Pin No. 2 4 6 8 10 Description Ground USBD1+/3+ USBD1-/3Key USB_VCC USBF1 1 2 9 10 USBF2 USBF1 Multi-Tech Systems, Inc.
Chapter 2 - Installation FAN1/FAN2: 3 Pin FAN Connector Pin No. 1 2 3 Description Ground +12V FAN Status FAN1/2 1 2 FAN1 3 FAN2 PSW1: For ATX Power Button Pin No. 1 2 Description PANSW GND PSW1 1 2 1 2 PSW1 Multi-Tech Systems, Inc.
Chapter 2 - Installation IDEB1/IDEB2: IDE Interface Connector (40Pin 2.54mm Pitch Header) Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Description Reset # Data 7 Data 6 Data 5 Data 4 Data 3 Data 2 Data 1 Data 0 Ground DMA REQ# IOW # IOR # IOCHRDY DMA ACK # Interrupt SA1 SA0 HDC CS0 # HDD Active LED # Pin No.
Chapter 2 - Installation FDCA1: Floppy Interface Connector (34 Pin Header) Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 Description Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground NC Ground NC Pin No.
Chapter 2 - Installation LPTA1: Parallel Connector (26 Pin 2.54mm Pitch Header) Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 Description Strobe # Data0 Data1 Data2 Data3 Data4 Data5 Data6 Data7 Acknowledge # Busy Paper Empty Printer Select Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 Description Auto Form Feed Error # Initialize # Printer Select IN # Ground Ground Ground Ground Ground Ground Ground Ground KEY LPTA1 1 2 LPTA1 26 25 Multi-Tech Systems, Inc.
Chapter 2 - Installation COMA1: RS-232 Serial Port #1 Connector (D-Sub) Pin No. 1 2 3 4 5 6 7 8 9 Description Data Carrier Detect (DCDA #) Receive Data (RXDA) Transmit Data (TXDA) Data Terminal Ready (DTRA #) Ground (GND) Data Set Ready (DSRA #) Request To Send (RTSA #) Clear To Send (CTSA #) Ring Indicator (RIA #) COMA1 COMA1 1 5 6 9 Multi-Tech Systems, Inc.
Chapter 2 - Installation COMB1: Serial Port #2 Connector (Header) Pin No. 1 2 3 4 5 6 7 8 9 10 Description RS-232 Data Carrier Detect (DCDB #) Data Set Ready (DSRB #) Receive Data (RXDB) Request To Send (RTSB #) Transmit Data (TXDB) Clear To Send (CTSB #) Data Terminal Ready (DTRB #) Ring Indicator (RIB #) Ground KEY COMB1 1 9 2 COMB1 10 Multi-Tech Systems, Inc.
Chapter 2 - Installation LANB1: Type 2 (RJ-45 with LED) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Description Fast E-Net Giga Net TX+ MD0+ TXMD0RX+ MD1+ T45 MD2+ T45 MD2RXMD1T78 MD3+ T78 MD310-/100-/1000+ 10+/100+/1000Link+/ACTLink-/ACT+ LANB1 LANB1 8 1 ¼ Pin9 to pin12 are on the solder side. Multi-Tech Systems, Inc.
Chapter 2 - Installation VGAA1: External VGA Connector (15 Pin D-Sub) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description Red Color Signal Green Color Signal Blue Color Signal NC Ground Ground Ground Ground NC Ground NC DDC-DATA H-Sync. V-Sync. DDC-CLK VGAA1 VGAA1 1 6 11 5 10 15 PKM1: PS/2 Keyboard & Mouse Connector (6P Mini Din) Pin No. 1 2 3 4 5 6 Description PS/2 Keyboard Data PS/2 Mouse Data Ground +5 V PS/2 Keyboard Clock PS/2 Mouse Clock PKM1 PKM1 6 5 4 3 1 2 Multi-Tech Systems, Inc.
Chapter 2 - Installation KCN1: 5 Pin Keyboard Cable Connector Pin No. 1 2 3 4 5 Description Keyboard Clock Keyboard Data NC Ground +5V KCN1 KCN1 5 1 LNB1: LAN 2x8 Pin 2.0mm Female/Male Pin No. 1 3 5 7 9 11 13 15 Descriptio n AMDI0+ AMDI0GND AMDI1+ AMDI1AMDI2+ AMDI2LNK1G Pin No. Description 2 4 6 8 10 12 14 16 ACTLD Vcc2_5 3VSB GND LNKLD AMDI3+ AMDI3LNK100 LNB1 LNB1 2 1 16 15 Multi-Tech Systems, Inc.
Chapter 2 - Installation SM1: Sound/Mouse 2x8 Pin 2.0mm Female/Male Pin No. 1 3 5 7 9 11 13 15 Description ICH_SPKR AC_RSTSYNC SDINO NC BITCLK SDOUT MSDAT Pin No. 2 4 6 8 10 12 14 16 Description AC97 VCC GND +3.3V GND +5V STANDBY NC MSCLK SM1 SM1 2 1 16 15 DIMMA1/2/3: 168 Pin DIMM Connector DIMMA1/2/3 DIMMA1/2/3 Multi-Tech Systems, Inc.
Chapter 2 - Installation LVDSE1: LVDS Panel Connector 2x20P 1.25mm SMT Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Description PVDD PVDD GND GND A0M A0P GND A1M A1P GND A2M A2P GND CLK1M CLK1P GND A3M A3P GND NC Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Description A4M A4P GND A5M A5P GND A6M A6P GND CLK2M CLK2P GND A7M A7P GND NC NC ENPBLT ENPVEE ENPVDD LVDSE1 39 40 LVDSE1 1 2 Multi-Tech Systems, Inc.
Chapter 3- BIOS Setup CHAPTER 3 – BIOS SETUP Phoenix Award‘s ROM BIOS provides a built-in Setup program that allows users to modify the basic system configuration and settings. The modified data will be stored in a battery-backed CMOS RAM so that this data will be retained even when the power is turned off. In general, the information saved in the CMOS RAM remains unchanged unless there is a configuration change in the system, such as hard drive replacement or new equipment installment.
Chapter 3- BIOS Setup CMOS Setup Utility To access the AWARD BIOS SETUP program, press the key.
Chapter 3- BIOS Setup Standard CMOS Setup When you select the STANDARD CMOS SETUP on the main program, the screen display will appears as: Standard CMOS Setup Screen Phoenix - Award BIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Fri, Oct 24, 2003 Item Help Time (hh:mm:ss) 13 : 29 : 45 Menu Level f f IDE Primary Master [None] Change the day, f IDE Primary Slave [None] month, year and f IDE Secondary Master [None] century f IDE Secondary Slave [None] Drive A [1.44M, 3.5 in.
Chapter 3- BIOS Setup Here is a brief explanation of drive specifications: • Access Mode: The settings are Auto, CHS, Large, LBA. • Cylinder: Number of cylinders • Head: Number of heads • Precomp: Write precom • Landing Zone: Landing Zone • Sector: Number of sectors Drive A and Drive B: Select the correct specifications for the diskette drive(s) installed in the computer. None No diskette drive installed 360K, 5.25 in 5-1/4 inch PC-type standard drive; 360 kilobyte capacity 1.2M, 5.
Chapter 3- BIOS Setup BIOS Features Setup When you select the BIOS FEATURES SETUP on the main program, the screen display will appear as: BIOS Features Setup Screen Phoenix - Award BIOS CMOS Setup Utility Advanced BIOS Features Virus Warning Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Swap Floppy Drive Boot Up NumLock Status Security Option PS2 Mouse Function Control HDD S.M.A.R.
Chapter 3- BIOS Setup Boot Up NumLock Status: The default setting is On. If it set Off, the cursor controls will function on the numeric keypad. Security Option: This setting controls the password in the main screen. The options are Setup and System. Select Setup and it will protect the Setup Utility settings from being tampered with. Select System if you want to use password feature every time the system boots up. The default setting is Setup.
Chapter 3- BIOS Setup Chipset Features Setup When you select the CHIPSET FEATURES SETUP on the main program, the screen display will appears as: Chipset Features Setup Screen Phoenix - Award BIOS CMOS Setup Utility Advanced Chipset Features DRAM Clock DRAM Timing By SPD SDRAM Cycle Length Bank Interleave Memory Hole P2C/C2P Concurrency Fast R-W Turn Around System BIOS Cacheable Video RAM Cacheable Frame Butter Size AGP Aperture Size CPU to PCI Write Buffer PCI Dynamic Bursting PCI Master 0 WS Write PCI De
Chapter 3- BIOS Setup Fast R-W Turn Around: This setting activates or deactivates a timing rapid of the cycles of letturascrittura. If memories of low quality are used or a system bus specifies outside deactivating this mode, not to have problems of instability of the system is advisable. Activating it with memories to high performance is possible. It is not possible to pretend resulted convincing from desks of memory of low quality.
Chapter 3- BIOS Setup Integrated Peripherals When you select the INTEGRATED PERIPHERIALS on the main program, the screen display will appears as: Integrated Peripherals Setup Screen Phoenix - Award BIOS CMOS Setup Utility Integrated Peripherals On-Chip Primary PCI IDE [Enabled] On-Chip Secondary PCI [Enabled] [Add-On Card] IDE Init Display First [Enabled] USB Controller [Disabled] USB Keyboard Support [Disabled] USB Mouse Support [Auto] AC97 Audio [Disabled] Onboard Lan Boot ROM [Enabled] Onboard FDD Cont
Chapter 3- BIOS Setup Onboard FDD Controller: Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you want to use it. If you install add-in FDD or the system has no floppy drive, select Disabled in this field. The settings are Enabled and Disabled. Onboard Serial Port 1 / Port 2: Select an address and corresponding interrupt for the first and second serial ports. The settings are 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled, Auto.
Chapter 3- BIOS Setup Power Management Setup The Power Management Setup controls the CPU card’s Green features.
Chapter 3- BIOS Setup PnP/PCI Configuration Both the ISA and PCI buses on the CPU card use system IRQs & DMAs. You must set up the IRQ and DMA assignments correctly through the PnP/PCI Configuration Setup utility; otherwise the motherboard will not work properly.
Chapter 3- BIOS Setup IRQ Resources: When resources are controlled manually, assign each system interrupt as one of the following types, depending on the type of device using the interrupt.
Chapter 3- BIOS Setup PC Health Status (Optional) This section helps you to get more information about your system including CPU temperature, FAN speed and voltages. It is recommended that you contact your motherboard supplier to get proper value about your setting of the CPU temperature. Phoenix - Award BIOS CMOS Setup Utility PC Health Status CPU Temperature System Temperature FAN1 FAN2 Vcore +2.5V +3.3V +5V +12V Ç È Æ ³ Move Enter: Select 36º C/ 96º F 29º C/ 80º F 0 RPM +0.95 V +2.56 V +3.46 V +5.
Chapter 3- BIOS Setup Set Supervisor / User Password The SUPERVISOR/USER PASSWORD utility sets the password. The SBC is shipped with the password disabled. If you want to change the password, you must first enter the current password, then at the prompt -- enter your new password. The password is case sensitive, and can be up to 8 alphanumeric characters. Press after you have finished typing in the password. At the next prompt, confirm the new password by re-typing it and pressing again.
Chapter 3- BIOS Setup Exit Without Saving Select this option and press the key to exit the Setup Utility without recording any new values or changing old ones.
Chapter 4 – Drivers Support CHAPTER 4 – DRIVERS SUPPORT Use Your Driver CD-ROM This chapter provides information on how to install the drivers in generally and related directory that come with the CD-ROM in the package. Please follow the instructions set forth on the screen carefully. 1. Find the directory for your O/S accordingly. 2. Always read the README.TXT before installation 3. Run the *.EXE and follow the installation prompt step by step. File Directory Multi-Tech Systems, Inc.
Appendix A – Watchdog Timer APPENDIX A – WATCHDOG TIMER You can enable the watchdog when your application software monitors an unexpected or not respond, then the timer generates a reset to reboot your system. During the period of enable to reset, you could still cancel reset by disabling the watchdog. Decide the way you want to set the period for reset by selecting hardware or software watchdog (if both of them are available). For hardware setting period, select period by jumper.
Appendix B - Warranty APPENDIX B – WARRANTY Multi-Tech Warranty Statement Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of purchase is not provided, two, five, or ten years (depending on model) from date of shipment.
Appendix B - Warranty bank or your company’s purchase order for repair charges. Repaired units shall be shipped freight collect, unless other arrangements are made in advance. Please direct your questions regarding technical matters, product configuration, verification that the product is defective, etc., to our Technical Support department nearest you or email support@multitech.com. When calling the U.S., please direct your questions regarding repair expediting, receiving, shipping, billing, etc.
Index INDEX A AC97 Audio......................................................................34 Accelerated Graphics Port ................................................33 ACPI Function..................................................................36 AGP Aperture Size ...........................................................33 AGP Master 1 WS Read ...................................................33 AGP Master 1 WS Write ..................................................33 Assign IRQ for USB ......
Index LVDSE1 - Panel Connector .........................................25 PKM1 - PS/2 Keyboard & Mouse................................22 SM1 - Sound/Mouse.....................................................24 USBF1/USBF2 - USB Port ..........................................14 VGAA1 - External VGA Connector.............................22 I/O ConnectorPSW1 - ATX Power Button .......................15 Initial Display First ...........................................................34 Installing Drivers .....
Index UART 2 Mode Select .......................................................35 USB Controller .................................................................34 USB Keyboard Support ....................................................34 USB Mouse Support .........................................................34 V VGA Card.........................................................................34 Video Off In Suspend .......................................................36 Video Off Method ........
