User manual

34
GS10/GS15, Operation
Establishing a Bluetooth connection between PC and GS GNSS instrument
Step Description
1. Start the PC and turn on the GS GNSS instrument.
)
Instead of connecting to your PC, you can connect your GS GNSS
instrument to the Leica CS field controller. In this case, turn on the
Leica CS field controller, start SmartWorx Viva and establish a Blue-
tooth connection to the GS GNSS instrument.
2. Run the Bluetooth software and start the Bluetooth Setup Wizard.
3. Click Next. The Bluetooth Device Selection will be started and an auto-
matic search will be done.
4. Select the shown GS GNSS instrument and click Next. The Bluetooth Secu-
rity Setup is started.
5. Type in 0000 as Bluetooth security code and click Pair Now. The pairing
procedure will be done and the Bluetooth Service Selection is started.
6. Highlight Personal Ad-hoc Network and check the checkbox for Personal
Ad-hoc Network.
)
Do not select Serial Port as service.
7. Click Next. The Bluetooth Setup Wizard Completion Page is started.
8. Type in a name for your GS GNSS instrument and click Finish to complete
the Bluetooth Setup Wizard.